wwctl profile add

Add a new node profile

Synopsis

This command adds a new named PROFILE.

wwctl profile add PROFILE

Options

-c, --cluster string              cluster group
    --comment string              arbitrary string comment
    --diskname string             set diskdevice name
    --diskwipe                    whether or not the partition tables shall be wiped
    --fsformat string             format of the file system
    --fsname string               set the file system name which must match a partition name
    --fspath string               the mount point of the file system
    --fswipe                      wipe file system at boot
-G, --gateway ip                  the node's IPv4 network device gateway
    --gateway6 ip                 the node's IPv6 network device gateway
-h, --help                        help for add
-H, --hwaddr string               the device's HW address for given network
    --image string                image name
-i, --init string                 the init process to boot the image
-I, --ipaddr ip                   IPv4 address in given network
    --ipaddr6 ip                  IPv6 address in given network
    --ipmiaddr ip                 the IPMI IP address
    --ipmiescapechar string       the IPMI escape character (defaults: '~')
    --ipmigateway ip              the IPMI gateway
    --ipmiinterface string        the node's IPMI interface (defaults: 'lan')
    --ipminetmask ip              the IPMI netmask
    --ipmipass string             the IPMI password
    --ipmiport string             the IPMI port
    --ipmitagadd stringToString   add ipmi tags (default [])
    --ipmitemplate string         template used for ipmi command
    --ipmiuser string             the IPMI username
    --ipmiwrite WWbool[=true]     writing of IPMI configuration (true/false)
    --ipxe string                 the iPXE template name
-A, --kernelargs strings          kernel arguments
    --kernelversion string        kernel version
    --mtu string                  the MTU
-N, --netdev string               the device for given network
-M, --netmask ip                  the network's netmask
    --netname string              network which is modified (default "default")
    --nettagadd stringToString    add network tags (default [])
    --onboot WWbool[=true]        network device (true/false)
    --partcreate                  create the partition if it does not exist
    --partname string             set the partition name so it can be used by a file system
    --partnumber string           the partition number (if not set, next free slot is used)
    --partsize string             the partition size (if not set, maximum possible size is used)
    --parttype string             the partition type GUID
    --partwipe                    if true, Ignition will clobber an existing partition if it does not match the config
    --prefixlen6 string           the network's IPv6 prefix length
-p, --primarynet string           the primary network interface
-P, --profile strings             the node's profile members (comma separated)
    --root string                 the rootfs
-R, --runtime-overlays strings    the runtime overlay
-O, --system-overlays strings     the system overlay
    --tagadd stringToString       add tags (default [])
-T, --type string                 device type of given network

Options inherited from parent commands

-d, --debug                 Run with debugging messages enabled.
-v, --verbose               Run with increased verbosity.
    --warewulfconf string   Set the warewulf configuration file

SEE ALSO